Resource Library
White papers, data sheets, videos, etc. — they’re all here. Search by type, solution, and/or product category.
Application Notes
Fiber Optic Utility Probes Product Note
Information about Dip Tip Rugged Probes, Quality Probes, Tank Wall Plates, and Fiber Optic Extensions
View Resource
Manuals
Monroe 288C Graphing Software Operating Guide
Instructions for using the Monroe 288C charge plate monitor graphing software.
View Resource
Data Sheets
Trek 541A Walking Test Adapter Kit Data Sheet
The walking test adapter kit for the Trek 541A series allow analysis of charge levels accumulated on the human body per compliance with ANSI/ESD STM 97.2. and IEC Standard 61340-4-5.
View Resource
Data Sheets
Trek 152P-2P Two Point Resistance Probe Data Sheet
The Trek 152P-2P probe is used to perform accurate two point resistance measurements in the range of 10<sup>3</sup> to 10<sup>13</sup> ohms.
View Resource
Data Sheets
Monroe 287 CPM Plate Adapter Data Sheet
The Monroe 287/22C, 6” x 6” plate adapter enables the Monroe 287 to perform the same as meters meeting ESD Association Standard No. 3.
View Resource
Data Sheets
Monroe Electrostatic Fieldmeter Sensors Data Sheet
Monroe 1036E and 1036F sensors compatible with Monroe 177A fieldmeter system and Monroe 256D portable fieldmeter.
View Resource
Application Notes
Electric Fields and Fieldmeters in Web Converting Application Note
This document provides the reader with a review of how fieldmeters operate to measure electric fields, the effects of web-converting machine geometry and operator techniques when measuring electric fields, how handheld fieldmeters are used to investigate where static problem areas exist on machines, and techniques for interpreting fieldmeter readings.
View Resource
Application Notes
Grounding Considerations for the Trek 152 Resistance Meter Technical Note
Learn how the Trek 152 Resistance Meter shield/ground connection is useful to minimize the effect of extraneous fields, line frequencies, and other noise sources on very high resistance measurements.
View Resource
Application Notes
Non-Contact Surface Charge/Voltage Measurements Application Notes
This application note reviews the methods of measurements of surface electric charges and potentials using electrostatic fieldmeters and voltmeters.
View Resource
Application Notes
Plate Self Decay of Charged Plate Monitors Application Note
Learn more about how in the absence of air ions, any discharge of the isolated plate is known as plate self decay or plate isolation.
View Resource